User guide

ALEOS 4.3.4 Software Configuration User Guide
266 4114514
b. Log into ACEmanager, go to Admin > Log.
6. Select View Logs from the menu on the left side of the window.
Figure 14-5: ACEmanager: Admin > Log, View Log
Note: VPN info and debug information uses the term racoon (rather than VPN), as shown
in Figure 14-5.
Note: If you toggle the “Display in Log?” field, clear and refresh the View Log page. (You
do not need to reboot the device.)
Tip: Use View Log for troubleshooting purposes (e.g., when setting up the IPsec configu-
ration). The Log page allows you to establish the tunnel connection and monitor the results
directly. To change the intervals at which the log is displayed, you can change the settings
in Auto Refresh.
Actions on the View Log screen include:
• Auto Refresh — The drop-down menu allows you to set up an automatic log
page refresh, and the interval between refreshes: 30 secs, 1 minute, or
2 minutes.
• Refresh button — Initiates a manual page refresh
• Clear button — Clears out the tunnels
• Save button — Creates a text file of the log