User guide

ALEOS 4.3.4 Software Configuration User Guide
264 4114514
The hardware bypass will remain in effect until the ALEOS software resets either
via ACEmanager command or the hardware Reset button.
Note: Because Radio Passthru is not USB/net or USB/serial, a different set of drivers are
required to connect to the radio installed inside an AirLink device. Additionally, while it is
possible to send AT commands to the radio using a terminal connection, there are software
applications designed to communicate with the radio directly. If you need to use Radio
Passthru, contact your Sierra Wireless AirLink representative to obtain the needed drivers
and/or software application.
Figure 14-3: ACEmanager: Admin > Radio Passthru
Log
The Log file is a system log of the AirLink device.
The Logging configuration screen enables you to configure log verbosity and
display filtering. The View Log screen enables you to view and save logs. The
logs are in plain text.
To configure what you want to include in the logs:
1. In ACEmanager, go to Admin > Log.