User guide
Admin
Rev 1 Oct.13 263
Radio Passthru
Radio Passthru allows a direct connection, using USB, to the internal radio.
Normal cellular radio operation is suspended while Radio Passthru is enabled.
Radio Passthru is generally used only in certain troubleshooting scenarios.
Status Update Period
(seconds)
The time interval (in seconds) when a status update should be sent
Power Input Voltage
(volts)
Displays the power input voltage in volts. If the input voltage ground is connected to the
AirLink device case (without serial connection), this value reads .3 V (approx.) less; if
ground is connected (with serial connection), the value reads .3 V (approx.) more.
Board Temperature
(celsius)
Displays the board temperature in degrees (Celsius)
Radio Module Internal
Temperature (celsius)
Displays the temperature of the internal radio module in degrees (Celsius).
Number of System
Resets
Counter of the number of system resets over the life of the device or since the configuration
was reset
Periodic Reset Timer
(hours)
Resets the device after the specified number of hours. 0 = disabled
ToD Reset: Reset
Interval in (days)
Number of days between resets
0 = Disabled
Example: If this field is set to 3, the device resets every third day.
ToD Reset: Time Zone
Offset from UTC
Time zone adjustment (Offset in easterly direction from UTC Time)
Possible values are 0–23
Example: Pacific Standard Time would be 17
ToD Reset: Hour of
day when Reset
occurs
The local hour of the day when the reset occurs
Possible values are 0–23
Example: 4 is 4:00 am
Ping Use this button to confirm that a connected device is responding.
1. Click Ping.
2. In the pop-up window, enter the device IP address or DNS name and click Ping Now.
Reset to Factory
Default
Erases all customer-defined settings and resets all settings (passwords, LAN and WAN
configuration, security settings, ALEOS Applications Framework, etc.) to the original
factory settings. ALEOS AF is also reset to disabled.
Field Description