User guide

ALEOS 4.3.4 Software Configuration User Guide
262 4114514
Figure 14-2: ACEmanager: Admin > Advanced
Field Description
Date and Time Queries the internal clock. The date and time are always specified in 24-hour notation
(UTC).
• mm/dd/yyyy= date in month/day/year notation
• hh:mm:ss= time in 24-hour notation
Enable Over-the-Air
Programming
Enables/disables over-the-air ALEOS software upgrading of the AirLink device. When
Sierra Wireless releases a new version of ALEOS, you can upgrade your remote devices
with Over-the-Air Programming (OPRG) enabled.
• Enable (default)
• Disable
Default Configuration
Reset
Enables or disables the hardware reset button
Sets the AirLink device to allow (or not allow) the hardware reset button to reset the device
to the factory default settings.
• Allowed—Pressing the hardware reset button for 10 seconds reboots the device and
resets it to the factory defaults.
• Not Allowed—Pressing the hardware reset button for 10 seconds reboots the device,
but does not reset it to the factory defaults.
Note: Regardless of the setting selected in this field, you can still reset the device by
clicking the “Reset to Factory Defaults” button in ACEmanager.
Status Update
Address
Enter the device Name/Port. Name is the domain name or IP address, and Port is the port
of the device where the device status updates will be sent. This report can be sent to a LAN
connected host (e.g., 192.168.13.100/1122) or a remote location
(e.g., newb.eairlink.com/17000). The status parameters are sent in an XML format.