User guide

I/O Configuration
Rev 1 Oct.13 255
Current State
The Current State screen allows you to view the current values (as of the last
refresh) of analog and digital inputs, pulse counts for digital inputs, and raw and
transformed values for analog inputs. You can also use this screen to change the
current values for Relay outputs. This change occurs immediately without a
reboot.
Figure 13-1: ACEmanager: I/0 > Current State (GX Series device with I/O X-Card)
Table 13-1: I/O: Current State
Command Description
Digital Input # value Query individual digital inputs. The digital inputs report either a 0 (open) or 1 (closed).
• n= digital Input number
Note: Five digital inputs are available on an the AirLink GX Series device with an I/O
X-Card. Otherwise, there is one digital input value.
You can also use an AT command to read these values. See *DIGITALIN[n]? on
page 372.