User guide

Application Configuration
Rev 1 Oct.13 249
Figure 12-8: ACEmanager: Serial > Port Configuration
3. Set the Server Address and Port for TCP. Under the Serial > Port
Configuration tab, set the Destination Port and the Destination Address to the
port and address of the AVL server that the TCP application will be communi-
cating with.
Figure 12-9: ACEmanager: Serial > Port Configuration
4. Configure the serial port. To communicate with Garmin:
· Input 9600, 8N1 in Configure Serial Port
· Select None in Flow Control
· Select Ignore DTR in DTR Mode.
Figure 12-10: ACEmanager: Serial > Port Configuration parameters
5. Check the Garmin’s communications status under the Status > Applications
tab. Garmin data service states are:
· Not Enabled — Not acknowledged by the AVL server