User guide

Application Configuration
Rev 1 Oct.13 247
Figure 12-4: ACEmanager: Events Reporting > Events
Note: Daily and monthly limits will reset at the end of the billing cycle.
Once the data plan limit is reached, you may want to turn off cellular
communication with any user devices connected to the host port until the next
billing cycle starts.
To configure the device to turn off services, another event and action must be
configured.
If you decide to disable the events and actions associated with the Data Usage
feature, then the Data Usage Events must be deleted.
To turn off services on the data plan when the limit is reached:
1. Configure an event and an action. The event (shown below) is triggered when
100% of the monthly plan limit is reached.
Figure 12-5: ACEmanager: Events Reporting > Events >Turn off Service
2. Create an action to turn off the services. When triggered, this action will
prevent cellular communication to any user device connected to a host port.