User guide

ALEOS 4.3.4 Software Configuration User Guide
238 4114514
Advanced Settings
Figure 11-8: ACEmanager: Serial > IO X-Card Serial Port > Advanced
Table 11-7: Serial > X-Serial Port Configuration >Advanced and TCP Configuration
Field Description
Enable CTS Assert CTS when there is network coverage. Options are:
• Disable (default)
• Enable
You can also use an AT command to configure this field. See *CTSE on page 360.
Quiet Mode Disable or enable display of device responses.
Options are:
• Enable
• Disable (default)
You can also use an AT command to configure this field. See Q on page 368.
AT Verbose Mode Sets the level of information returned for AT commands
Options are:
• Verbose (default)
• Numeric
You can also use an AT command to configure this field. See V on page 371.
Call Progress Result
Mode
When enabled adds 19200 to CONNECT messages.
Options are:
• Enable
• Disable (default)
You can also use an AT command to configure this field. See X on page 371.