User guide

ALEOS 4.3.4 Software Configuration User Guide
234 4114514
PPP
Figure 11-5: ACEmanager: Serial > Port Configuration > PPP
Modbus Address List
To add a Modbus Address:
1. Log in to ACEmanager as “user” and go to Serial > MODBUS Address List.
2. Click Add More.
3. Enter the Index number, an equal sign, and the IP address. For example:
10=123.123.123.123 (decimal)
0xA=123.123.123.123 (hex) Prefix 0x to hex numbers.
Including the port number after the IP address is optional. If you include the
port number, separate the port number and IP address by a colon.
For example:
10=123.123.123.123:11223
0xA=123.123.123.123:11223
Table 11-5: Serial Port Configuration > PPP
Field Description
PPP
a
Device PPP IP Sets the device IP address (in private mode)
Host PPP IP Sets the host IP address (in private mode)
a. Note: This section is only visible when PPP is selected in the Startup Mode Default field.