User guide

ALEOS 4.3.4 Software Configuration User Guide
228 4114514
Advanced
Figure 11-2: ACEmanager: Serial > Port Configuration > Advanced
Table 11-2: Serial Port Configuration > Advanced
Field Description
Advanced
Assert DSR Assert DSR always when the device is in a data mode (UDP, TCP, etc.), or when the device
is in network coverage. Options are:
• Always (default)
• In Data Mode
• In Coverage
You can also use an AT command to configure this field. See &S on page 369.
Assert DCD Assert DCD always, or when the device is in a data mode (UDP, TCP, etc.) or when the
device is in network coverage. Options are:
• Always (default)
• In Data Mode
• In Coverage
You can also use an AT command to configure this field. See &C on page 366.