User guide

ALEOS 4.3.4 Software Configuration User Guide
226 4114514
7. Click Apply.
8. Reboot the AirLink device.
9. Use a Telnet or SSH terminal client such as Putty or Teraterm to connect to
the appropriate port:
· If you are using Autologin, Telnet to the port specified in the Device Port
field (default is 12345). SSH is not available with Autologin.
· If you are not using Autologin, you can Telnet or SSH into the port specified
in the Remote Login Server Telnet/SSH Port field (default is 2332).
10. If prompted, log in with the following credentials:
· User name: sconsole
· Password: 12345 (default)
For information on changing the default reverse telnet password, see Change
Password on page 261.
ALEOS redirects you to the router or other device connected to the AirLink device
serial port. You can use this connection to configure connected device.