User guide

ALEOS 4.3.4 Software Configuration User Guide
218 4114514
· Enable for Satellite Count—The number of satellites the GPS is using to
get a satellite fix
· Enable for Vehicle Speed—The speed of the vehicle reported by GPS
· Enable for Vehicle Heading—The direction the vehicle is traveling reported
by GPS
· Enable for Engine Hours—The number of hours the engine has been on,
based on either Power In or Ignition Sense
· Enable for Odometer—The number of miles reported by GPS
· Enable for TAIP ID—The TAIP ID for the AirLink device
• Device Name
These elements in the Device Name group are general identifiers for the Air-
Link device and its cellular account.
· Enable for Device ID—The device ID (ESN or EID/IMEI) of the AirLink
device (enable for a cellular account with a dynamic IP address)
· Enable for Phone Number—The phone number of the AirLink device
· Enable for Device Name—The name of the AirLink device
· Enable for MAC Address—The MAC Address of the Ethernet port of the
AirLink device
· Enable for SIM ID—The SIM ID of the AirLink device
· Enable for IMSI—The IMSI of the SIM installed in the AirLink device
· Enable for GPRS Operator—The wireless Mobile Network Operator the
SIM card is associated with
· Enable for Time—The time the AirLink device is active
• Network Data
The Network Data in this group relates to the cellular network and the connec-
tion state of the AirLink device.
· Enable for Network State—The network state for the AirLink device
· Enable for Network Channel—The network channel to which the AirLink
device is connected
· Enable for RSSI—The signal strength for the AirLink device
· Enable for Network Service—The network service for the AirLink device
· Enable for Network IP—The IP address given by the cellular network
· Enable for Daily Usage MB—The daily usage (in MBs) of the AirLink device
· Enable for Monthly Usage MB—The monthly usage (in MBs) of the AirLink
device
• Tx/Rx
The Network Traffic in this group relates to the cellular network and the net-
work between the AirLink device and any directly connected device(s).
· Enable for Bytes Sent—The number of bytes sent on the cellular network
since last reset
· Enable for Bytes Received—The number of bytes received from the cellular
network since last reset
· Enable for Host Bytes Sent—The number of bytes sent from the network
between the AirLink device and the connected device(s) since last reset
· Enable for Host Bytes Received—The number of bytes received from the
network between the AirLink device and the connected device(s) since last
reset
· Enable for IP Packets Sent—The number of IP packets sent on the cellular
network since last reset