User guide

GPS Configuration
Rev 1 Oct.13 203
Device ID in Local
Reports
Allows use of the IMEI/ESN or phone number in LATS local IP RAP reports to identify a
device/vehicle. Options are:
• None (default)
• Phone Number
• ESN/IMEI
Tip: Including the device ID is especially useful when your devices have dynamic IP
addresses.
Note: If you want the device ID included in all other RAP GPS reports, see Use Device ID
in Location Reports on page 205.
Local Report
Destination IP
This read-only field shows the IP address of the destination that LATS reports are send to.
Through its use of DHCP, ALEOS detects if there is a connected host and designates that
host's IP as the LATS destination. When no host is connected at startup, ALEOS uses the
first IP address in the Ethernet DHCP pool as the destination. When using Public mode for
an interface, that interface will be the LATS destination even if it's not the first host
connected.
Note: The Local Report Destination IP is not configurable. If you want a GPS report to go
to a specific host IP, user Server 1–4 configuration. (See Servers 1 to 4 on page 187.)
Report Odometer Enables odometer reporting
Options are:
• Disable (default)
• Enable
Note: Only applies for RAP report types.
Report Digital Inputs Enables digital input reporting. Options are:
• Disable (default)
• Enable
Note: Only applies for RAP report types.
Table 9-3: GPS: Local/Streaming—LATS
Field Description