User guide

ALEOS 4.3.4 Software Configuration User Guide
20 4114514
5. Click Save (or OK depending on your system browser).
Note: Some of the configuration settings are specific to individual devices. Avoid having
those settings in your saved template as the devices you configure with the template could
cease to work with the cellular or local network. A feature specific template allows you to
omit configuration elements which need to be specific to a device.
6. Type in a file name that is descriptive of the template (to easily find it later)
and save it to a location on your computer. Not all browsers allow you to
change the name of the file while downloading. As long as you do not change
the extension .xml, you can change the name and location of the file after it
has downloaded.
The template downloads.
Applying a Template
You can use a template you created with the above steps, or a template provided
by your AirLink representative or someone in your company who has set up a
device template.
You can save the template to:
• Your computer’s hard drive and apply it locally (following the instruction
below)
• An FTP site and use an AT command to apply the template remotely (for
more information, see *TPLUPDATE on page 323).
Note: You can apply templates that contain X-Card information, such as Wi-Fi configu-
ration information, or Dual Ethernet X-Card fields, even when an X-Card is not present in a
device. Those fields that do not apply to the device that the template is downloaded to are
not displayed.
To apply the template locally to a device:
1. Connect to the device you want to configure using ACEmanager.
2. Click the Upload button on the toolbar.
Figure 2-5: ACEmanager: Load
3. At the Upload window, click Browse, and select the template you have saved.
You may need to change folders if you saved it to a different location.