User guide

GPS Configuration
Rev 1 Oct.13 193
Report Server Port
Number
Destination port on the server where GPS reports are sent
The destination port can be the same for all servers or you can configure a different
destination port for each server. Options are: 1–65535
Defaults:
• Server 1 destination port: 22335
• Server 2 destination port: 22336
• Server 3 destination port: 22337
• Server 4 destination port: 22338
You can also use an AT Command to set these values. For more information, see
*PPPORT on page 358.
Note: If the account is behind a firewall (for example, an account that is not Internet-
routable), the report may be redirected to come from a different source port when it arrives
at the server.
The source ports on the device are not configurable. The following source ports are used:
Table 9-1: GPS: Servers 1–4
Field Description
Protocol Server Port
RAP/NMEA 1 17335
2 17345
3 17346
4 17347
TAIP 1 21000
2 21001
3 21002
4 21003
XORA 1 9494
2 9495
3 9496
4 9497