User guide

ALEOS 4.3.4 Software Configuration User Guide
192 4114514
Servers—Configure where the reports are sent
Report Server IP
Address
IP address or FQDN (fully qualified domain name) of the server where GPS reports are
sent
Example: 192.100.100.100
The IP address can be for a local host or a remote server that is accessed over-the-air or
via a VPN tunnel.
If an IP with the last octet of 255 is configured (i.e. 192.168.13.255), a report would be
broadcast to all IPs on that subnet. When configured to a local host subnet, any connected
host would receive the report.
Note: If you want to use it as a LAN host, it must have a private IP address. If you want to
use a public IP address, use LATS. (See Local/Streaming—LATS on page 200.)
You can also use an AT Command to set this value. For more information, see *PPIP on
page 356.
Table 9-1: GPS: Servers 1–4
Field Description