User guide

GPS Configuration
Rev 1 Oct.13 191
Report Type
GPS Report Type Sets the type of GPS Report
Options are:
RAP
• GPS Data—RAP GPS report that contains only GPS data
• GPS+Date—RAP GPS report that contains GPS data with the UTC time and date
(default)
• GPS+Date+RF—RAP GPS report that contains GPS data, the UTC time and date,
and radio frequency information for the cellular connection
• GPS+Date+RF+EIO—RAP GPS report that contains GPS data, the UTC time and
date, radio frequency information for the cellular connection, and the current I/O state
NMEA
• NMEA GGA+VTG—NMEA GPS report that contains fix information, vector track, and
speed over ground
• NMEA GGA+VTG+RMC—NMEA GPS report that contains fix information, vector
track, speed over ground, and recommended minimum GPS data
• NMEA GGA+VTG+RMC+GSA+GSV—NMEA GPS report that contains fix infor-
mation, vector track, speed over ground, the recommended minimum GPS data,
overall satellite data, and detailed satellite data
TAIP
• TAIP data—TAIP GPS report that contains position and velocity
• Compact TAIP data—TAIP GPS report that contains the compact position
• TAIP LN report—TAIP GPS report that contains a long navigation message
• TAIP TM report—TAIP GPS report that contains the time and date
XORA
• XORA data—GPS report used with Xora asset tracking
Note: Only RAP GPS reports can be configured to include odometer and digital I/O infor-
mation.
Note: You can also use an AT Command to set this value. For more information, see
*PPGPSR on page 356.
Table 9-1: GPS: Servers 1–4
Field Description