User guide

Services Configuration
Rev 1 Oct.13 181
SNMP Contact This is a personal identifier of the contact person you want to address queries to. This is a
customer defined field.
SNMP Name This is the name of the device you want to refer to. This is a customer defined field.
SNMP Location Location of where your device is stored. This is a customer defined field.
Read Only SNMP
User Name Allows these SNMP users to view, but not change the network configuration
Security Level Security types available: None, Authentication Only, and Authentication and Privacy.
Authentication Type Authentication types available: MD5 or SHA
Note: This field is only available when you select either Authentication and Privacy, or
Authentication Only in the Security Level field.
Authentication Key This key authenticates SNMP requests for SNMPv3.
• Minimum length: 8 ASCII characters
• Maximum length: 255 ASCII characters
Example: My Key_1234
Note: This field is only available when you select either Authentication and Privacy, or
Authentication Only in the Security Level field.
Privacy Type Privacy types available: AES or DES
Note: This field is only available when you select Authentication and Privacy in the
Security Level field.
Privacy Key This key ensures the confidentiality of SNMP messages via encryption
• Minimum length: 8 ASCII characters
• Maximum length: 255 ASCII characters
Example: My Key_56789
Note: This field is only available when you select Authentication and Privacy in the
Security Level field.
Read/Write SNMP
For a description of the Read/Write SNMP fields, see Read Only SNMP on page 181.
TRAP Server User
TRAP Server IP/FQDN Identifies the IP address or fully qualified domain name (FQDN) of the trap server that the
AirLink device sends SNMP traps to
TRAP Server Port Identifies the specific port the trap server is on
• 1 – 65535
• Default is 162.
Field Description