User guide

ALEOS 4.3.4 Software Configuration User Guide
178 4114514
SNMPv2
Figure 8-18: ACEmanager: Services> Management (SNMPv2)
Field Description
SNMP Configuration
Enable SNMP Allows you to enable/disable SNMP
Default: Disable
SNMP Version Allows you to select either SNMP protocol Version 2 (default) or Version 3 communications.
SNMP Port Controls which port the SNMP Agent listens on:
• 1–65535
• Default is 161.
SNMP Contact This is a personal identifier of the contact person you want to address queries to.
This is a customer defined field.
SNMP Name This is the name of the device you want to refer to.
This is a customer defined field.
SNMP Location Location of where your device is stored
Enter a meaningful description of where the AirLink device is located.
Read Only SNMP User