User guide

Services Configuration
Rev 1 Oct.13 173
SMS > Advanced
Figure 8-15: ACEmanager: Services > SMS > Advanced
Field Description
SMS Address Type For most networks, use the default setting (International). The address type of the phone
number used to send outgoing messages and command responses. Options are:
• International (default)
• National
• Network Specific
• Subscriber
• Abbreviated
SMS Address
Numbering Plan
For most networks, use the default setting (ISDN/Telephone). The address numbering plan
of the phone number used to send outgoing messages and command responses. Options
are:
• Unknown
• ISDN/Telephone (default)
• Date Numbering
• Telex
• National
• Private
• ERMES
AT+CGSMS Allows you to choose the technology used to send SMS messages. For most networks, use
the default setting (Do nothing). Options are:
• Do nothing (default)
• Set AT+CGSMS=0—GPRS
• Set AT+CGSMS=1—Circuit switched
• Set AT+CGSMS=2—GPRS Preferred (Uses circuit switched if GPRS is not available)
• Set AT+CGSMS=3—Circuit Switched Preferred (Uses GPRS if circuit switched is not
available)
Note: If your gateway is able to receive SMS messages, but is unable to send them, try
changing this field to Set AT+CGSMS=1.