User guide

Rev 1 Oct.13 17
2
2: Device Configuration
To access ACEmanager:
1. Insert the SIM card, if applicable. Refer to the AirLink device user
guide for details.
2. Power on the AirLink device.
3. Launch your browser and enter the IP address and port number
http://192.168.13.31:9191
4. Log in:
· User Name: “user” (entered by default) or “viewer
Use the “user” login for configuring or monitoring your device.
Logging in as “viewer” only allows you to view the configu-
ration and connection state. You cannot make any configu-
ration changes.
· Default Password: 12345
Note: ACEmanager has a 15 minute timeout. After 15 minutes of inactivity,
you are redirected to the login screen.
To prevent others from changing the AirLink device settings, you can
change the ACEmanager password (Chapter 14).
Figure 2-1: ACEmanager: Main Login screen
After your initial login to ACEmanager, you have the option of
displaying the device status parameters on subsequent login
screens.
5. In ACEmanager, go to Services > Device Status Screen.
6. In the Device Status on Login Screen field, select Enable. (For
details, see Device Status Screen on page 183.)