User guide

Services Configuration
Rev 1 Oct.13 169
You can also set the Connection timeout using an AT command. For more
information, see *SMSWUPTOUT on page 349.
6. If you selected Class 0 Wake Command or Wake Command in step 3, you
can specify the SMS command in the Wake Command field or use the default
value, WAKEUP. Sending this SMS to the device will wake it up. Example:
&&&WAKEUP.
7. Click Apply.
SMS Security
Inbound SMS Messages
Incoming SMS messages are received as UDP packets, and forwarded to the
local host IP address and port. The UDP packets are in the same format as sent
messages.
When Trusted Phone Number security is enabled, incoming messages coming
from the phone numbers in the Trusted Phone Number list are the only ones for
which commands will be performed (relay, response etc.) or gateway messages
forwarded. Incoming messages from all other phone numbers will be ignored.
Commands sent to the device with the correct password are always treated as
coming from a trusted number.
All non-alphanumeric characters except a space will be replaced by a dot in
ACEmanager.