User guide

ALEOS 4.3.4 Software Configuration User Guide
168 4114514
SMS Wakeup
When the AirLink device is in Connect on traffic mode (for details, see Always on
connection on page 110), you can configure the AirLink device to also initiate a
mobile network data connection on receipt of a specific type of SMS. After the
connection is established, it remains active until the configured timeout expires.
The a mobile network data connection closes after the specified timeout period.
Outgoing traffic sent after the timer is set does not reset the timer.
To configure SMS Wakeup:
1. In ACEmanager go to WAN/Cellular > Advanced and ensure that the Always
on connection field is set to Disabled - Connect on traffic.
2. Go to Services > SMS.
Figure 8-12: ACEmanager: Services > SMS
3. Under SMS Wakeup, select the desired SMS Wakeup Trigger. The options
are:
· Feature Disabled
· Any Class 0 message
· Class 0 Wake Command
· Any SMS message
· Wake Command
Note: “Class 0 Wake Command” and “Wake Command” are SMS commands. They will
not work if SMS mode is “Gateway only” or if the password is missing in “Password only'”
mode.
4. Click Apply.
5. In the Connection timeout (minutes) field, enter the number of minutes the
mobile network data connection remains active after SMS Wakeup Trigger is
received. The default value is 2.