User guide

Services Configuration
Rev 1 Oct.13 165
Configure ALEOS for Control and Gateway mode
1. In ACEmanager, go to Services > SMS.
Figure 8-11: ACEmanager: Services > SMS (Control and Gateway)
SMS Mode
2. In the SMS Mode field, select Control and Gateway.
3. Enter the desired password in the ALEOS Command Password field or leave
the field blank to use the default password.
The password you configure can be any alphanumeric string between 1 and
255 characters long.
For more information see SMS Password Security on page 171.
4. If desired, enter the ALEOS Command Prefix or use the default prefix, &&&.
Note: The ALEOS Command Prefix field in Control and Gateway mode cannot be blank.
You must either enter a prefix or use the default. When sending SMS commands in this
mode, the prefix must be included.
5. In the SMS destination field, select from the following options:
· Serial—Messages are sent to the Serial port on the destination host.
Proceed to step 14.