User guide

Services Configuration
Rev 1 Oct.13 149
Low Power Mode
(continued)
Time Delay + Low Voltage
If you select this option, the device delays going into Low Power mode caused by a low
voltage drop (below threshold) or ignition off.
Note: There is always a minimum of 1 minute between the power down event and actual
shutdown (to give the AirLink device time to prepare); entering zero, for Low Power Mode
Delay, will not power down the device immediately.
Low Power Mode
(continued)
Periodic Timer
If you select the Periodic Timer, two additional fields appear:
• Periodic Timer Active Duration — Enter the time for how long the device needs to be
in Active mode
• Period Timer Inactive Duration — Enter the time for how long the device should be
inactive after the Active mode expires.
The Low Power mode process will repeat in a cyclical way (active and inactive).
Field Description