User guide

Services Configuration

Rev 1 Oct.13 147

Low Power

The AirLink device switches into Low Power Mode when the ACEmanager-

configured event occurs.

Low Power Mode is a standby mode whereby the AirLink processor and radio are

off and a low power timer and detection circuit are operational. When

ACEmanager-configured events are detected, the AirLink device powers up and

automatically connects to the Mobile Network Operator's network.

Figure 8-3: ACEmanager: Services > Low Power

ACEmanager

Port

Identifies the port set for ACEmanager. Reboot the device after applying the port

change.

ACEmanager

SSL Port

Identifies the SSL port set for ACEmanager access. Reboot the device after applying

the port change. Eight port Options are:

• 9443 through 9449 and 443. Default: 9443

Field Description

Low Power

Low Power Mode Allows you to set one of the following low power mode parameters:

• None (default)

• Time Delay

• Low Voltage

• Time Delay + Low voltage

• Periodic Timer

• Periodic Timer Daily Mode