User guide

Security Configuration
Rev 1 Oct.13 141
When enabled, only packets with source IP addresses matching those in the list
or range of trusted hosts will have unrestricted access to the AirLink device and/or
LAN connected devices.
Note: Inbound restrictions do not apply to responses to outbound data requests. To restrict
outbound access, you need to set the applicable outbound filter.
Figure 7-8: ACEmanager: Security > Trusted IPs > Inbound (Friends)
Field Description
Inbound Trusted IP
(Friend’s List) Mode
Disables or Enables port forwarding rules. Options are Disable (default) or Enable.
Non-Friends Port
Forwarding
Non-Friends port forwarding is like an allow rule for any of the forwarded ports. If it is
enabled, the port forwarding rules apply to all incoming packets. If it is disabled, only
Friends List IPs get through. Options are Disable (default) or Enable.
Trusted IP Each entry can be configured to allow a single IP address, for example 64.100.100.2, or the
IP addresses from a complete subnet, such as 64.100.10.255 allowing all IP addresses
from 64.100.10.0 to 64.100.10.255.
Range Start Specify the IP address range that is allowed access, for example 64.100.10.2 to start and
64.100.10.15 to end would allow 64.100.10.5 but would not allow 64.100.10.16.
Range End