User guide

ALEOS 4.3.4 Software Configuration User Guide
126 4114514
Field Description
VPN # Type Use this field to enable or disable the VPN # tunnel. If custom settings are used, they will
be saved and the tunnel can be disabled and re-enabled without needing to reenter any of
the settings. For a successful configuration, all settings for the VPN tunnel must be
identical between the AirLink Device VPN and the enterprise VPN server.
Options are:
• Tunnel Disabled (default)
• IPsec Tunnel
• GRE Tunnel
• SSL Tunnel
VPN # Status Indicates the current status of the VPN # connection. Use this when troubleshooting a VPN
# connection. Options are: Disabled, Not Connected, or Connected.
Set VPN Policy Click this button to apply the new settings. The device does not need to be rebooted.
VPN Gateway
Address
The IP address of the server that this VPN client connects to. This IP address must be
open to connections from the AirLink device. The default VPN Gateway IP Addresses are
static address on Sierra Wireless Servers. They are:
You can use these default IP addresses to confirm that an IPSec connection can be
established with your wireless configuration before making any configuration changes, and
as an example to model your VPN configuration after. (See Figure 6-3.)
Pre-shared Key 1 Pre-shared Key (PSK) used to initiate the VPN tunnel
My Identity Type Options are:
• IP (default) — The My Identity - IP field appears with the WAN IP address assigned by
the carrier
• FQDN — The My Identity - FQDN field appears. Enter a fully qualified domain name
(FQDN) e. g., modemname.domainname.com
• User FQDN — The My Identity - FQDN field appears. Enter a User FQDN whose
values should include a username (e.g. [e-mail])
VPN Gateway IP address
1
208.81.123.21
2
208.81.123.22
3
208.81.123.26
4
208.81.123.23
5
208.81.123.24