User guide

ALEOS 4.3.4 Software Configuration User Guide

120 4114514

First, you designate specific traffic to use the primary route, based on the

destination IP address and subnet mask. A configured tracking object test verifies

the validity of the primary route. If the test fails, the backup route is used. The

object test continues to run and as soon as the primary route is available, traffic is

switched back to the primary route.

You can direct the traffic to a network (Figure 5-8) or to an individual host

(Figure 5-9).

Figure 5-8: RSR directed to a destination network

Figure 5-9: RSR directed to a destination IP address (individual host)

To configure Reliable Static Routing:

1. In ACEmanager, go to WAN/Cellular > Reliable Static Route (RSR).

AirLink device

Internet

Network Management Center

Ethernet

Cellular

(Primary route)

(Backup route)

Network IP: 64.100.20.128

255.255.255.252

64.100.20.129

64.100.20.130