User guide

WAN/Cellular Configuration
Rev 1 Oct.13 119
Backup APN
This feature enables you to configure a backup APN to be used as a backup
network connection mechanism, only if the primary APN is not available. When it
is enabled, the device connects to the backup APN only if it is unable to connect
to the primary APN.
Note: Switching to the backup APN can take five minutes or more, depending on the
device. If the device is always connecting to the backup APN, check the primary APN to
ensure that it is configured correctly.
To configure a backup APN:
1. Go to WAN/Cellular > APN Backup.
Figure 5-7: ACEmanager: WAN/Cellular > APN Backup
2. Enter the backup APN.
3. Select the Network Authentication Mode. The options are:
· PAP (default)
· CHAP
· None
4. Enter the Network User ID and Password, if these are required for the
wireless network.
5. Click Apply.
Reliable Static Routing (RSR)
Reliable Static Routing enables you to force specified traffic to use different
routing rules (rather than the default, which is usually cellular) to direct specified
traffic to a designated primary route. If the primary route fails, the specified traffic
uses a backup route.