User guide

WAN/Cellular Configuration
Rev 1 Oct.13 117
Keepalive
Ping Time
(minutes)
The amount of time between pings when the device is idle.
Set the period to ping (if no valid packets have been received) a specified address (*IPPINGADDR)
to keep the device alive (online).
• Disable pinging (default)
• 5-255 minutes
*IPPING sets the interval, in minutes, at which you want Keepalive to test the network connection. To
disable Keepalive, set *IPPING to 0 (default setting).
Note: Pings count toward your Data Usage; the more frequently pings occur, the more your Data
Usage is affected. See Data Usage Using Keepalive.
Force
Keepalive
Ping
Determines if the ping should occur even if the device is not idle. Forces the IP ping even if IP traffic
has occurred during the time interval.
• Disable (default)
• Enable
Command Description