Owner`s manual

ASSEMBLY

IMPORTANT: TORQUE ALL BOLTS ACCORDING TO TORQUE SPECIFICATION TABLE WHEN STATED:

TIGHTEN FIRMLY.

This subframe may be used to install different attachments (see attachments page).

NOTE: The mower deck must be removed to install the subframe.

Remove the bolt that holds the left hand side mower lift

arm (item 1). Reinstall the lift arm by inserting (as

shown) the mounting pin (item 2), original sleeve (item

4) and flat washer (item 3) from the tractor.

Secure with the original nut inside the tractor frame.

Do the same operation on the right side.

Tighten firmly.

Over all view

Install the mounting pins

STEP 1

SUBFRAME PREPARATION FOR THE JOHN

DEERE TRACTORS

MODELS: LX 255, 266, 277, 277AWS, 279, 280, 288,

289 and GT 225, 235 245 and G-100

INSTALLING THE REFLECTORS

IMPORTANT: When operating the tractor with the

front mounted attachment, install the two red-colored

adhesive reflectors on the rear vertical surface of the

tractor’s fender.