Owner`s manual

ASSEMBLY

VERIFY BELT ROUTING:

-Lower the rotary broom to the ground and let it run for

a few seconds under supervision.

-Disengage the rotary broom and stop the engine.

-Check the belt to make sure it is well inserted in the

pulleys and that it has not flipped on its side on the

pulleys.

-Reinstall the belt guard.

VERIFY TIRE PRESSURE:

Check and adjust tractor tire pressure as follows:

Front tires: 20-25 psi

Back tires: 8-10 psi

Tire pressure must be even on both sides of the

tractor.

WARNING

TO PREVENT INJURIES:

It is the person who installs the drive mechanism

responsibility to make sure that when the clutch is

disengaged that all moving parts stop.

For more information, do not hesitate to contact

the technical support.