Owner`s manual

ASSEMBLY

VERIFY BELT ROUTING:

-Lower the snowblower to the ground and let it run for

a few seconds under supervision.

-Disengage the snowblower and stop the engine.

-Check the belt to make sure it is well inserted in the

pulleys and that it has not flipped on its side in the

pulleys.

-Reinstall the belt guard.

VERIFY SKID SHOE ADJUSTMENT:

LEVEL PAVED SURFACE: Adjust skid shoes to allow

3/16 to 1/4" clearance (A) between cutting edge and

surface.

UNEVEN OR GRAVEL SURFACE: Adjust skid shoes

to allow 1/2 to 5/8" clearance (A) between cutting edge

and surface.

VERIFY TIRE PRESSURE:

Check and adjust tractor tire pressure as follows:

Front tires: 20-25 psi

Back tires: 8-10 psi

Tire pressure must be even on both sides of the

tractor.

Adjust skid shoes

WARNING

TO PREVENT INJURIES:

It is the person who installs the drive mechanism

responsibility to make sure that when the clutch is

disengaged that all moving parts stop.

For more information, do not hesitate to contact

the technical support.