User's Manual

Software Upgrading
Unzip the "UPGRADE.FWU" software file in the root directory of the USB disk. Then firstly insert the USB disk into
USB port of soundbar, and plug the power cord of soundbar into main socket,upgrade will start automatically
and“UP” will be shown on the display, after a while display will show “OK”. It is indicated that upgrade is complete.
Re-plug again to play.
DISPLAY PANEL.
AC IN: Connect to power supply.
HDMI OUT (ARC):Connect to HDMI (ARC)/HDMI IN on TV.
HDMI IN 1 : Connect to HDMI OUT of TV/Satellite/Netework/
Set-top box/BD/Blue Ray DVD/DVD player.
HDMI IN 2 : Connect to HDMI OUT of TV/Satellite/
Netework/Set-top box/BD/Blue Ray DVD/DVD player.
USB PORT: Audio input from a USB storage device.
Upgrade software of this product.
OPTICAL: Connect to an optical audio output on TV or digital devices.
AUX: Auxiliary Audio input from Mp3/Phone/set-top box devices.
Product Diagram
5
1
2
3
4
5
6
7
6 7 8 9
10 11 12
8
9
10
11
12
INPUT: Select an input source for the Soundbar.
Volume: Decrease the volume.
Volume: Increase the volume.
Standby-on: Switch the Soundbar On or to standby.