User's Manual

• While in OPTICAL / HDMI ARC mode, if there’s no sound output from the unit and the status LED display
flashes, you may need to activate PCM or Dolby Digital Signal output on your source device
(e.g. TV, DVD or Blu-ray player).
• The unit may not be able to decode all digital audio formats from the input source. In this case, the unit will
mute. This is NOT a defect. Ensure that the audio setting of the input source (e.g. TV, game console,
DVD player, etc.) is set to PCM or Dolby Digital (Refer to the user manual of the input source device for its
audio setting details) with HDMI 1 / HDMI 2 / HDMI ARC / optical input.
• In HDMI mode, when DOLBY ATMOS audio format is entered, the Soundbar display shows DOLBY ATMOS.
• When DOLBY DIGITAL PLUS audio format is entered, the Soundbar display shows DOLBY SURROUND.
When you play Dolby ATMOS signals from Blue-Ray/Set Top Box or other devices to the ATMOS Soundbar,
Please follow below steps:
1. set these devices audio output to be auto or original code.
2. connect these devices HDMI OUT to the ATMOS Soundbar HDMI IN 1(select HDMI IN 1, so need to press
soundbar remote control Input key till LED display HDMI 1) or HDMI IN 2(select HDMI IN 2, so need to press
soundbar remote control Input key till LED display HDMI 2)
3. connect soundbar HDMI OUT(ARC) to TV HDMI IN.
4. if connect these devices HDMI OUT to TV, then connect TV HDMI ARC to the ATMOS HDMI ARC controll can
share with sound bar, but only power on / off, previous / next track, mute and volume of sound bar can be
controlled by your TV remote control. or connect these devices Optical to the ATMOS Soundbar,so that the
ATMOS soundbar output sound just be Dolby Digital Plus signal as Dolby ATMOS signals bandwidth are big and
cannot transfer by Optical or HDMI ARC Channels.
TIPS: (OPTICAL / HDMI ARC / HDMI 1 / HDMI 2 / DOLBY ATMOS)
15
HDMI OUT(ARC)
HDMI IN 1HDMI IN 2
HDMI IN
HDMI OUT
satellite or network set-top
box, or BD/Blue Ray DVD player
TV
HDMI OUT
STB(Set Top Box)
If your TV is not HDMI ARC-compliant, connect your soundbar to the TV through a standard HDMI connection.
• Use an HDMI cable (included) to connect the soundbar’s HDMI OUT socket to the TV’s HDMI IN socket.
• Use an HDMI cable (not included) to connect the soundbar’s HDMI IN (1 or 2) socket to your external devices
(e.g. games consoles, DVD players and Blue-Ray).
• Then short-press button on the sound bar or on the remote controller to switch to HDMI mode.
After successfully connected, the LED display will show or .
Important Note:
Option 2: Standard HDMI