Instruction Guide CD100 | Portable CD Player EN
Contents EN Box Contents ������������������������������������������������������������������������������������������������1 Controls & Functions ���������������������������������������������������������������������������������� 2 Instruction Guide ���������������������������������������������������������������������������������������� 3 Basic Operation ����������������������������������������������������������������������������������������� 3 Play a CD ������������������������������������������������������
Box Contents EN What’s in the Box? Oakcastle CD100 Portable CD Player 3.5mm to 3.
Controls & Functions EN Control Buttons 14 1 13 3 4 2 5 10 6 7 8 11 12 9 1. On/Off/Hold 7. Program 12. Charge indicator 2. DC 5V Power 8. Mode 13. Open 3. Display screen 9. Stop 14. Volume 4. Play/Pause 10. Next/Fast 5. Previous/Rewind 6. Equalizer 2 forward 11.
Instruction Guide EN Basic Operation Power on/off To power on or power off, switch the On/Off switch (Ref.1) to the ‘On’ or ‘Off’ position. Alternatively, press the ‘STOP’ button twice (Ref.9) to turn off the player, and press the ‘Play/Pause’ button (Ref.4) to turn on the player while the switch is set to ‘ON’. If the player will not be used for an extended period of time, ensure that it is switched off. Hold While the player is in use, you can switch the On/Off/Hold button to the ‘Hold’ position (Ref.
EN Instruction Guide Basic Operation Inserting a Disc Slide the ‘OPEN’ switch (Ref.13) to the ‘OPEN’ position to open the device door. Insert the disc into the CD player, pressing it gently into place. Close the disc door gently. Ensure that the disc door is completely closed, otherwise the player will not read the disc. Compatible disc formats: CD, CDR, HDCD, MP3 Using headphones or external speakers Listen to your audio CD through headphones by inserting wired headphones (with a standard 3.
Instruction Guide EN Play a CD Basic Controls and Functions Press Play/Pause (Ref.4) to play or pause the CD. Press Previous or Next (Ref.5)/(Ref.10) to skip to the previous or next track. Press and hold (Ref.5)/(Ref.10) to rewind or fast forward through a track. Press ‘Stop’ (Ref.9) to stop the CD.
EN Instruction Guide Bluetooth Connecting to Bluetooth To connect to an external Bluetooth device (headphones or speakers), follow the steps below. Switch the device on and wait for the CD to load. Press and hold the ‘Mode’ button (Ref.8) until the Bluetooth logo displays. While unconnected, the Bluetooth logo will flash on the screen (Ref.3) until connected. Follow the instructions for your external device to connect your external Bluetooth device to the CD100.
Instruction Guide EN Program your disc Program your Disc Follow the steps below to program your CD to play tracks in a specific order other than the default order. To do this, it may help to refer to the album cover or track list. Ensure the CD is stopped. Press PROG to enter program mode (Ref.7). Use the ‘Previous’ and ‘Next’ buttons (Ref.5)/(Ref.10) to select the first song you would like the disc to play (the display will show P01, p02, etc.
Instruction Guide EN Troubleshooting Observation Potential Cause/Solution Cannot read discs Make sure the label side of the disc is facing up. Ensure the disc is fully secured in place. Make sure the disc is not heavily scratched or damaged. Wipe the disc gently from the center out to the edge with a clean, dry, soft cloth. Try another new disc to check if the disc is faulty. Ensure the format of the disc is CD, CDR, MP3, or HDCD. No sound Check volume is turned up.
Specification EN Specifications Power source DC 5V/1A Micro USB 2.0 Standard Charging time 4 hours Charging voltage DC 5V/1A Operating Voltage 3.7V Power consumption approx. 1.5W Battery Lithium-ion polymer 3.7V/1400mah D/C conversion 16Bit Sampling frequency 44.
Safety Information EN 1. Read these instructions. ADDITIONAL WARNINGS 2. Keep these instructions. Instructions are also The apparatus shall not be exposed to dripping or available for download at www.majority.co.uk splashing and no objects filled with liquid, such as 3. Heed all Warnings vases, shall be places on the apparatus. 4. Follow all instructions Main plug is used to disconnect device and it should 5.
FCC Warning EN This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
www.oakcastle.co.
