Instruction manual

Buttons 5
Buttons
The SC-1 is controlled by four different capacitive touch sensors. These touch sensors detect the
presence of your thumbs when they are placed on top of the regions shown in the diagram. The
captions on the above diagram indicate how the different touch sensors will be referred to in the rest of
this manual.
Tips on Improving Button Response
If you are having difficulty triggering the touch sensors, try covering the entire area of the button with
your thumb. It is not necessary to press hard. Maximizing coverage improves the touch sensor
performance.
Large droplets of water can cause button response to suffer. To prevent this problem, you can rub
paraffin wax (standard candle wax) on the exterior surfaces of the buttons. This prevents droplets of
water from accumulating on the button surfaces. Wiping off the button surfaces with a rag or
shirtsleeve prior to using the buttons will help as well.