Instruction manual

SC-1 Features 3
Introduction
The SC-1 is a sail training tool designed to provide you with the feedback you need to sail faster. This
instruction manual is for the full firmware version.
SC-1 Features
The full firmware version gives the SC-1 the following features:
• Speed, compass, tactical compass, VMG and distance to line updated at 2 times a second
• Start timer with
user configurable start sequence
• Ability to display any two measurements simultaneously
• Maximum and best 10 second average
speed recall
• User configurable
device settings allow customization of select SC1 functionalities
• Up to 20 hours of battery life
• Over 20 hours of GPS data storage at record rate of every 2 seconds
• Data downloading through a USB link
• Downloaded data is easily formatted for use with Kattack, Google Earth and GPS Action Replay
• Internet updatable firmware allows you to benefit from ongoing product improvements and
feature additions
Basic and Full Firmware Version
The SC-1 basic firmware is an easy to use, stripped down version of the more powerful but complicated
SC-1 full firmware.
Use the basic firmware if you don't like reading instruction manuals and you only need speed, compass
and distance to line. Use the basic firmware if you are having problems with splashing water unlocking
your buttons and inadvertently changing the display mode. The basic firmware minimizes user input
and is less affected by water splashing on its buttons. You must perform a
firmware update to switch
between full firmware to basic firmware.
For more information on the basic firmware refer to the basic firmware manual.