Instruction manual

Device Operation 30
Start line Mode Changes To
If the top or bottom display is showing the start line mode it will switch to the mode you choose here
when the start timer expires. You can select from any of the modes. The default mode to change to is
compass mode.
Timeout Lock Enabled
Checking the box enables timeout lock. When enabled, the SC-1 locks when the buttons have been
inactive for a time period over the timeout lock value (seconds). During a timeout lock, the unit allows
the user to unlock the buttons. By default timeout lock is disabled.
Timeout Lock Value
Time without any user input required in seconds for the device to lock. Default value is 20 seconds.
Speed Lock Enabled
When enabled, the buttons lock when the device speed is above the speed lock value. Speed lock is
enabled by default.
Speed Lock Value
The threshold speed in knots at which the device buttons will lock if speed lock is enabled. The default
speed lock value is 2.0 knots.