Instruction manual

Lock Feature 11
Lock Feature
The Velocitek SC-1 uses touch sensors to accept user input. Splashing water can trigger the touch
sensors. To prevent the device from being inadvertently controlled by splashing water the user can
enable lock features. When the device is locked, buttons are non-functional. There are two lock
features Speed Lock and Timeout Lock.
Speed Lock
The unit locks when the device speed exceeds the speed lock value (knots). During speed lock, the unit
will not allow the user to unlock the buttons.
Timeout Lock
The unit locks when the buttons have been inactive for a time period over the timeout lock value
(seconds). During a timeout lock, the unit allows the user to unlock the buttons.
Locking Related to Timer Events
The device will lock in response to the following events if timeout lock is enabled:
• The timer is started