Instruction manual

Device Operation 6
Device Operation
This section describes everything you need to know before hitting the water with your SC-1.
Inserting Batteries
Open the waterproof case and insert 3 AA batteries into the metal clips on the circuit board. Be careful
to orient the batteries according to the polarity markings on the circuit board. These markings are circled
in red on the photograph above.
The SC-1 will work with rechargeable nickel metal hydride (NiMH) batteries or standard disposable AA
batteries. Disposable batteries will provide approximately 10 hours of life while rechargeable NiMH
batteries will last for approximately 20 hours.