User Manual

3
The accessory shoe located on the top of
the ActionPan can be used to attach any
accessory such as a microphone, LED
light, or flash with a hot shoe or cold shoe
type connection.
1. Insert your accessory’s hot shoe
foot into the accessory shoe
mount.
2. Use your accessory’s locking
mechanism to lock the accessory in
place and ensure that it is securely
attached to the ActionPan.
To change the direction of the shoe
mount, for added control over your
accessory’s angle or direction:
1. Loosen or remove the mounting
screw connecting the accessory
shoe to the ActionPan’s handle
via the large knob located at the
underside of the handle’s tip
2. Reposition the accessory shoe
mount as desired
3. Tightly screw the mounting screw
back into the threaded socket of
the accessory shoe mount.
The accessory shoe can also be removed
if not needed by unscrewing its mounting
screw and removing the shoe mount.
ATTACHING ACCESSORIES