User Manual

8
Turn ON the Receiver:
Slide the Group Switch to either A, B, or
C and the unit will power up. The LED will
flash red at 2 second intervals to indicate
that the Receiver is working.
To power down after use, slide the Group
Switch back to the O position.
Turn ON the Transmitter:
Press and hold the power button for 2
seconds to power up the Transmitter.
The Group Indicator light will turn on and
show the currently selected group. The
Group indicator light will turn o after 2
seconds and the Transmitter will enter
Standby mode.
To power down after use, press and hold
the power button for 2 seconds. The LED
at the top of the unit will flash 4 times at
half-second intervals to indicate that it is
powering down.
POWERING UP