User Manual

ManualsBrandsVello ManualsLighting & StudioFreeWave Fusion Wireless Flash Trigger & Remote Control for Canon SLR

11

CONNECTING THE LIGHTS

Connecting to a Flash Unit:

1. Switch the ﬂash’s locking switch to the

unlock position

2. Insert the ﬂash’s hot shoe foot into the

Receiver’s hot shoe mount

3. Switch the ﬂash’s locking switch to the

locked position

Connecting to a Studio Light

You will need to use the included Studio

Trigger Cable in order to connect the

Receiver to a studio light.

1. Plug the 2.5 mm side of the cable into the

Receiver’s output jack.

2. Plug the 3.5 mm side of the cable into the

studio light remote jack

3. If your studio light has a 1/4" phono jack,

you will need to use the included 2.5 mm

to 1/4" phono cable.