User Manual

23
Protect the Wireless ShutterBoss
Do not drop the devices. The units may
malfunction if subjected to a strong shock or
vibration.
Keep Dry
The devices are not waterproof. Avoid getting
the devices wet. Do not expose them to high
humidity.
Avoid Sudden Temperature Changes
Sudden changes in temperature, such as
entering or leaving a warm building on a cold
day, can cause damaging condensation inside
the devices. Protect the transmitter and
receiver by placing them inside a carrying case
or a sealed plastic bag and allowing them to
adjust to temperature changes gradually.
Avoid Magnetic Fields
Strong static charges or electromagnetic
fields generated by equipment such as radio
transmitters can interfere with the system.
A strong external static charge can cause
unusual characters to display on the screen or
may cause the device to malfunction. In such
a situation; turn o the camera, disconnect
all devices, remove the batteries, and then
replace them a few seconds after the display
goes out.
Liquid Crystal Displays
The display panel is a liquid crystal display. At
very low temperatures, the display response
my become slower. And at temperatures
higher than 60°C (40°F), the display may
darken. In either case, the display will return
to normal at room temperature.
CARE OF THE WIRELESS SHUTTERBOSS