User Manual

N
TIMER CONTROLS
SHUTTER CONTROLS
CH
BATT
9
Once you’ve set the Interval time under the
Timer Controls, you must tell the Wireless
ShutterBoss how many shots to trigger.
. Turn on the receiver by pressing the
Power button until the display comes on.
2. Set your camera exposure.
3. Use the arrow button on the transmitter
to select N under the Timer
Controls. Press the left and right
arrows until N is displayed.
4. Press the set button in the middle of
the arrow button to change the setting
for number of exposures. Use the up and
down arrows to change the number of
shots.
5. Press set button again to accept your
selection.
6. If this is the last of your Timer Control
settings, press Timer Start/Stop to begin
the exposure process.
TIMER CONTROLS: NUMBER OF SHOTS