User Manual

LONG
TIMER CONTROLS
SHUTTER CONTROLS
CH
BATT
hours minutes seconds
7
Under Timer Controls, the Wireless
ShutterBoss can control shutter speeds that
are much longer than your camera oers, and
you don’t have to manually end the exposure
as you do with the Shutter Controls.
. Turn on the receiver by pressing the
Power button until the display comes on.
2. Set your camera to bulb exposure.
3. Use the arrow button on the transmitter
to select LONG under the Timer
Controls. Press the left and right
arrows until LONG is displayed at
the top of the LCD.
4. Press the set button in the middle of the
arrow button to change the Long Exposure
setting. Use the left and right arrows
to move between hours, minutes, and
seconds. Use the up and down arrows to
change the time values.
5. Press the set button again to accept your
selection.
6. Continue on to other Timer Control
settings or press Timer Start/Stop to
begin the exposure process.
TIMER CONTROLS: EXPOSURE LENGTH