User Manual

TIMER CONTROLS
SHUTTER CONTROLS
CH
BATT
number of shots seconds of delay
4
The Delay feature in the Shutter Controls
gives you simple control over delay and
number of shots. To combine delay with
other exposure settings, use the Timer
Control settings described later in this
manual.
. Turn on the receiver by pressing and
holding the Power button.
2. Set your camera to single shot mode.
3. Use the arrow button on the transmitter
to select delay shooting mode. Press the
left and right arrows until the delay
icon is displayed at the bottom of
the LCD.
4. Press the set button in the middle of the
arrow button to change the settings.
5. Press the up and down arrows to set the
number of exposures (from  to 99 shots,
or set the device to take an unlimited
number of Photos when set to “--”.).
6. Press the right arrow to set the delay time
(from  to 59 seconds).
7. Press the set button in the middle of the
arrow button to lock your settings.
8. Press the transmitter’s shutter release
button halfway to wake or focus the
camera. Fully depress the shutter release
button. The delay countdown will begin
and one shot will be taken per second.
SHUTTER CONTROL: DELAY