User Manual

3
Setting the sound sensitivity
The sound sensitivity can vary
for dierent sound sources.
By adjusting the sensitivity
level you can control the level
of sound the Stryker will pick
up to trigger your camera. To
adjust the sensitivity, rotate
the sensitivity dial on the right
hand side of the device. Rotate
the dial clockwise and continue
to turn the dial until the LED
turns red. This indicates that
you have passed the threshold
the device determines as the
ideal setting in your current
environment. Then rotate the
dial counter-clockwise, slightly,
until the red LED turns o.
This should be the optimized
sensitivity setting where any
sound will trigger the shutter.